Add QCS615 LYRA EVK platform

arch/arm64/boot/dts/qcom/Makefile

@@ -415,6 +415,7 @@ talos-evk-lvds-auo,g133han01-dtbs	:= \
 	talos-evk.dtb talos-evk-lvds-auo,g133han01.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= talos-evk-camera-imx577.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= talos-evk-lvds-auo,g133han01.dtb
+dtb-$(CONFIG_ARCH_QCOM) += talos-lyra-evk.dtb
 x1e001de-devkit-el2-dtbs	:= x1e001de-devkit.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= x1e001de-devkit.dtb x1e001de-devkit-el2.dtb
 x1e78100-lenovo-thinkpad-t14s-el2-dtbs	:= x1e78100-lenovo-thinkpad-t14s.dtb x1-el2.dtbo

arch/arm64/boot/dts/qcom/talos-lyra-evk.dts

@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+/dts-v1/;
+
+#include "talos-evk-som.dtsi"
+#include <dt-bindings/sound/qcom,q6afe.h>
+
+/ {
+	model = "Qualcomm QCS615 IQ 615 EVK";
+	compatible = "qcom,talos-evk", "qcom,qcs615", "qcom,sm6150";
+	chassis-type = "embedded";
+
+	aliases {
+		mmc1 = &sdhc_2;
+	};
+
+	dp0-connector {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+
+		hpd-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp0_connector_in: endpoint {
+				remote-endpoint = <&mdss_dp0_out>;
+			};
+		};
+	};
+
+	hdmi_connector: hdmi-out {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_out: endpoint {
+			remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "qcom,qcs615-sndcard";
+		model = "TALOS-EVK";
+
+		pinctrl-0 = <&mi2s1_pins>, <&mi2s_mclk>;
+		pinctrl-names = "default";
+
+		pri-mi2s-capture-dai-link {
+			link-name = "Primary MI2S Capture";
+
+			codec {
+				sound-dai = <&codec_da7212>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai PRIMARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		pri-mi2s-playback-dai-link {
+			link-name = "Primary MI2S Playback";
+
+			codec {
+				sound-dai = <&codec_da7212>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vreg_v1p8_out: regulator-v1p8-out {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg-v1p8-out";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vreg_v5p0_out>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_v3p3_out: regulator-v3p3-out {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg-v3p3-out";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vreg_v5p0_out>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_v5p0_out: regulator-v5p0-out {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg-v5p0-out";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		/* Powered by system 20V rail (USBC_VBUS_IN) */
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	hdmi_bridge: bridge@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>;
+		avdd-supply = <&vreg_v1p8_out>;
+		dvdd-supply = <&vreg_v1p8_out>;
+		pvdd-supply = <&vreg_v1p8_out>;
+		a2vdd-supply = <&vreg_v1p8_out>;
+		v3p3-supply = <&vreg_v3p3_out>;
+		interrupts-extended = <&tlmm 26 IRQ_TYPE_LEVEL_LOW>;
+		adi,dsi-lanes = <4>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	codec_da7212: codec@1a {
+		compatible = "dlg,da7212";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&q6prmcc LPASS_CLK_ID_MCLK_2 LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+		clock-names = "mclk";
+		VDDA-supply = <&vreg_v1p8_out>;
+		VDDIO-supply = <&vreg_v1p8_out>;
+		VDDMIC-supply = <&vreg_v3p3_out>;
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&adv7535_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_state_on>;
+	pinctrl-1 = <&sdc2_state_off>;
+	pinctrl-names = "default", "sleep";
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l10a>;
+	vqmmc-supply = <&vreg_l2a>;
+
+	status = "okay";
+};